Back to Learning Center
Reference

Stud Welding Glossary

3 min readMay 2026

Plain-English definitions for common stud welding terms.

Arc Stud Welding

A stud welding process that uses an arc to melt the stud and base material, then plunges the stud into the molten weld pool.

CD Stud Welding

Capacitor discharge stud welding. A fast stud welding process that uses stored capacitor energy, commonly used for smaller studs and thin material.

Ferrule

A ceramic ring used in many arc stud welding applications to contain the molten metal and shape the weld flash.

Weld Flash

The ring of weld metal around the base of an arc welded stud after the ferrule is removed.

Lift

The distance the stud is lifted away from the base material during the arc stud welding cycle.

Plunge

The movement of the stud into the molten weld pool during the welding cycle.

WPS

Welding Procedure Specification. A written procedure that explains how the weld is to be made.

PQR

Procedure Qualification Record. A record showing that a welding procedure was tested and qualified when required.

Headed Shear Stud

A headed stud commonly used to create composite action between steel and concrete.

DBA

Deformed bar anchor. A weldable reinforcing-style anchor used on embed plates and structural connections.

Through-Deck Welding

Welding a headed stud through metal deck and into the steel beam below.

Bend Test

A test where a stud is bent to evaluate weld soundness.

Torque Test

A test often used for threaded studs where torque is applied to evaluate weld performance.

Arc Blow

A welding issue where magnetic forces affect the arc and can cause the weld to form unevenly.

Stud Stick-Out

The amount of the stud that protrudes past the end of the ceramic ferrule before the weld is fired. Correct stick-out is critical for consistent arc stud welds.

Ready to Rent?

Put This Knowledge to Work

Every machine we rent is pre-calibrated to your stud specs before it ships. Get an exact quote for your next job.