Back to Learning Center
Equipment

Arc vs. CD Stud Welding: Which Process Do You Need?

5 min readMarch 2025

Two dominant stud welding processes are used across construction, manufacturing, and fabrication: Drawn Arc (DA) and Capacitor Discharge (CD). Choosing the wrong one costs you time, money, and weld quality. Here's how to pick the right process for your job.

What Is Drawn Arc Welding?

Drawn arc welding uses a high-current arc to melt the base of the stud and the base material simultaneously. The stud is then plunged into the molten pool, forming a full 360° fusion weld. It requires a ferrule (ceramic shield) or shielding gas to protect the weld pool.

Arc welding is used for structural applications — shear studs on bridge decks and composite beams, deformed bar anchors, and large-diameter threaded studs on heavy plate. Diameters typically range from 1/4" to 1-1/4".

What Is Capacitor Discharge Welding?

CD welding discharges a bank of capacitors in milliseconds, creating an extremely fast, low-heat weld. Because the heat input is so low, it does not distort thin base materials and leaves virtually no witness mark on the reverse side. No ferrule is required.

CD is used for smaller-diameter studs on thin sheet metal, HVAC panels, electrical enclosures, insulation pins, and sign attachment. Diameters typically range from #4-40 up to 3/8".

How to Choose

  • Stud diameter ≤ 3/8" on thin sheet metal → CD welding
  • Stud diameter ≥ 1/2" on structural steel or heavy plate → Drawn Arc
  • Sizes 1/4"–3/8" on structural steel → Arc welding (HBS Visar 650 on 110V)
  • No access to generator power on a jobsite → CD Pegasar 500 (battery) or HBS Visar 650 (110V arc)
  • AWS D1.1 compliance required → Drawn Arc with WPS/PQR documentation

Bottom Line

If you're doing structural steel work, you need arc. If you're attaching to thin sheet metal or panels, you need CD. Still unsure? Use our Equipment Finder tool or call us — we'll match you to the right machine in 2 minutes.

Ready to Rent?

Put This Knowledge to Work

Every machine we rent is pre-calibrated to your stud specs before it ships. Get an exact quote for your next job.