Back to Learning Center
Applications

Arc Stud Welding Applications

5 min readMay 2026

Arc stud welding is used when a strong welded fastener is needed on steel. It is common in construction, bridge work, industrial maintenance, fabrication, and structural steel.

Bridges

Bridge projects often use headed shear studs on steel girders. The studs help connect the steel girder and concrete deck so the system can act together. Bridge work can have strict inspection, procedure, and documentation requirements, so planning and testing are important.

Metal Deck and High-Rise Buildings

High-rise buildings, hospitals, parking structures, schools, and commercial projects often use headed shear studs welded through metal deck to steel beams. This is one of the highest-production stud welding applications.

Wood Nailer Studs

Threaded studs can be welded to beams, channels, plates, or other steel members so wood nailers can be attached with nuts and washers. Common uses include perimeter nailers, roof edges, bridge rail work, curb conditions, and miscellaneous steel details.

Embed Plates

Embed plates are often made with headed studs or deformed bar anchors welded to steel plate. The plate is then cast into concrete and later used as a connection point. Stud welding is faster than hand welding each anchor.

Deformed Bar Anchors

DBAs are used when reinforcing-style anchorage is required. They are common on embed plates, concrete connections, seismic details, bridges, and infrastructure work.

Refineries and Industrial Facilities

Refineries, power plants, chemical plants, and industrial sites use arc stud welding for steel attachments, anchors, threaded studs, equipment supports, platforms, maintenance work, and repairs. These jobs often require careful planning around safety, access, coatings, power, and inspection.

When Arc Stud Welding Is the Right Choice

  • The stud is structural
  • The stud diameter is larger
  • The base material is heavy steel
  • The job requires high production
  • Drilling is not practical
  • One-sided attachment is preferred
  • AWS D1.1 requirements may apply

Ready to Rent?

Put This Knowledge to Work

Every machine we rent is pre-calibrated to your stud specs before it ships. Get an exact quote for your next job.